(405) 235-9353
Cart 0

ME-Miller MILLERMATIC 141 120V 60HZ 1PH

Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power.
A breakthrough control that automatically sets your welder to the proper  parameters.  Auto-Set offers all-in-one MIG minus the hassle of finding parameters.  Simply set the wire diameter, set the material thickness, and start welding!
Uses 120V household input power so there is no special power requirements.  Flexible to use in any location!
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
This technology provides a smooth, spatter-free start.  The best starting machine in the 120V MIG category!  No more pop-gun starts or spatter to clean up.
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded.  Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.

Includes: Millermatic 141
6.5-ft. (2 m) power cord with plug
10-ft. (3 m) M-100 MIG gun and cable assembly
10-ft. (3 m) work cable with clamp
Argon and AR/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Two contact tips for .030-in. (0.8 mm) wire
Quick Select drive rolls for .024-in (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
Material thickness gauge (#229 895)
Velcro cord wraps

NetHeight: 12.5000||in
NetLength: 20.5000||in
NetWeight: 51.0000||lbs
NetWidth: 11.2500||in



We Also Recommend