ME-Miller MILLERMATIC 212 AUTO-SET 200/230V 60HZ 1PH
All-in-one wire welder that welds material from 22 gauge to 3/8 in. thick, in a single pass.
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set makes set up very simple and gives you precise settings instantly.
The Spoolmate 200 saves time for the operator by eliminating the need to go back to the machine to change wirefeed speed.
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Keeps welding output constant even if power input varies by +/- 10%.
Makes wire electrically "cold" until trigger is pulled. This makes unit safer and torch easier to position before starting to weld.
Our Fan-On-Demand™ cooling system only operates when needed, reducing power consumption and contaminants drawn into the machine.
Allows users to easily roll cylinders on and off of rack - no need to lift cylinders.
Now with longer 15-ft M-25 MIG gun
Includes: Millermatic® 212 Auto-Set™
Material thickness gauge #229895
10 ft (3 m) work cable with clamp
7 ft (2.1 m) power cord and plug
15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in. wire
Argon mix regulator/flow gauge and hose
Extra contact tips
Factory-installed running gear with EZ-Change™ Low Single Cylinder Rack
.030/.035 in reversible drive rolls
NetHeight: 30.0000 in
NetLength: 40.0000 in
NetWeight: 183.0000 lbs
NetWidth: 19.0000 in