ME-Miller PKG,MILLERMATIC 190 W/RUNNING GEAR/CYLINDER RACK
Welds 24 gauge - 5/16 in. (0.8-7.9mm) mild steel. Uses 240V input power.
Miller inverter technology reduces the weight of the machine to 35lbs on top of the ergonomically friendly case design, making the machine easier than ever to move around your workspace.
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding! As always, Auto-Set can be disabled to manual mode to set custom parameters if desired.
Uses 240V input power! Enough power to tackle any size job.
Fan only operates when needed reducing noise and power consumption.
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns. The Quick Select drive roll offers three grooves- two for different size solid wire and a third for flux-cored wire.
This technology provides a smooth, spatter-free start. The best starting machine in its class! No more pop-gun starts or spatter to clean up.
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
Includes: Millermatic 190
Material thickness gauge #229 895
Velcro cord wraps
Running gear/cylinder cart #301239
6.5-ft. (2 m) power cord with plug
10-ft. (3 m) M-100 MIG gun and cable assembly
10-ft. (3 m) work cable with clamp
Argon and AR/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Two contact tips for .030-in. (0.8 mm) wire
Quick Select™ drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire